Monday 14 March 2011

Warmaster Part 3

Well as expected Saturday was a complete wash out but I did do a bit on the Sunday. Not enough to complete them but next Saturday I will start again I will see how far I fall short.

You can see some of them in the picture below.

I also started some bases for Future War Commander. I just drilled a hole through the base and inserted the flight stand. I then cut the stand to size and trimmed the bottom. I also used a file to smooth that side down.

Then it is PVA and builders sand, painted by Sandtex Chocolate Brown and covered in flock. The stones were painted in Foundry Chesnut A, B and C. Tonight it will drybrushed with Sandtex Brick Red and Light Cream and then they are finished with only the miniatures to be pinned and glued to the stand.

Thats all for now.







2 comments:

  1. I take it you have got a pile of "hover" tanks to base up Dave?? Or is that for your lizardy/ snakey/ amphibiay type beasties???

    ReplyDelete
  2. Pile of hover tanks and a further 12 to paint up.

    The lizards actually do not fit on that base and I have another 8 of them to do.

    Should have this army finished soon.

    ReplyDelete